TOKYO KEIKI FLAT RADAR LEVEL SENSOR MRF-10
Category: Latest ProductFLOW AND LEVEL MEASUREMENT
Specifications
Flat Radar Level Sensor MRF-10
General Measuring principle Time of Flight Impulse Radar Technology
Operating frequency 5.8GHz
Half power beam angle Lengthwise: 50°/ Crosswise: 23°
Display /Configuration No display / Graphical PC Configuration available
Electrical Power supply Loop-powered 16 ~ 36V DC
Output Analog: 4-20mA + Digital: HART Protocol
Output variable Level, Ullage (m or ft), Volume(%), Amplitude (dB)
Signal on alarm Hold, Low (3.9mA), High (22mA)
Others Arrester and 10m shielded twisted 3 - cores Cable are built-in.
Mechanical Housing (Enclosure) Body: Casting stainless steel (316 equivalent)/Antenna face: FRP
Size 172 x 192 x 54mm (without Cable gland)
Mass Approx. 2.7kg (without Cable)
Environment Ambient temperature -20℃ ~ 70℃ (-4°F ~ 158°F)
Ambient pressure ATM
Protection degree IEC 60529 IP68 (10m Depth /24hr.)
Measuring Performance Accuracy ±5mm (0.1 - 5m range)
±10mm (5 - 10m range)
Repeatability ±1mm
Update interval 1sec
Measuring range Up to 10m Max.
Applicable circular channel: more than φ400mm
TOKYO KEIKI AUTHORISED DISTRIBUTOR PROVIDER IN MALAYSIA
TOKYO KEIKI AUTHORISED DISTRIBUTOR FLAT RADAR LEVEL SENSOR MRF-10 IN MALAYSIA
MRF-10 FLAT RADAR LEVEL SENSOR TOKYO KEIKI AUTHORISED DISTRIBUTOR IN MALAYSIA
FLAT RADAR LEVEL SENSOR MRF-10 TOKYO KEIKI AUTHORISED DISTRIBUTOR IN MALAYSIA
URBAN FLOOD LEVEL SENSOR TOKYO KEIKI AUTHORISED DISTRIBUTOR IN MALAYSIA
Details
Features
- IP68 submergible
Stormwater will not break MRF-10 by under the water. - Compact body (Height: 54mm)
Height: 54mm, easy installation for narrow space like under the Manhole - Loop-Powered
Easy replacement to existing Loop-powered instrumentations - HART communication
HART protocol has been superimposed onto analog output - Easy Configuration
Graphical PC software by HART - Simple one-piece structure
No independent main console required
View more about TOKYO KEIKI FLAT RADAR LEVEL SENSOR MRF-10 on main site