SUMA OPTIMIX 2G 90-75

SUMA OPTIMIX 2G 90-75


Specifications
OPTIMIX 2G 90-75
.
Details

For the reliable stirring operation and maintaining the stream
  • Propeller in hardened steel, optional galvanized, ss304 or ss316
  • Mechanical seal of SiC/SiC
  • Seperated oil chambers for motor, gear and bearing housing
  • Longlife-oil within the gear and bearing housing
  • Guide mast support with 4 rollers for 100 x 100 / 120 x120 / 150 x 150 mm masts
  • Galvanically isolated to the mast through ss316-rope (V4A)
  • The cable is restistant against biomass

Technical data

2G 90- 75
Rated power 5.5 / 9.0 kW
Full load current 18 A
propeller speed 75 rpm
Thermal protection PTC 130°C
Explosion protection zone Ex-Zone 2


More product information
Application:
The streamlined design ensures better heat dissipation and a range of application up to 55°C is possible.

Flow preservation:
Because of the slow propeller speed and the greater propeller diameter this submersible motor is mainly for the flow preservation.

Gear:
The resilient planetary gear has its own oil circuit with turbine-oil and an oil change interval of 12,000 operation hours.

Galvanic isolation:
The SUMA 4-roller guide system avoids the direct contact to the guiding mast and gives a galvanic isolation. The ss316 rope is also isolated to the submersible motor through a special socket.

Guiding system:
Through cable clips the connection cable is guided behind the mast that there is no possibility for the cable to reach the propeller and a safe stirring operation can be ensured.

Propeller:
The propeller is a 3-bladed LT 1400 propeller. For different substrates are galvanized propellers, stainless steel propellers or hardened steel propellers available. Thanks to a great propeller diameter a high thrust is achieved. The propeller is coated with 2K-Epoxy lacquer.


View more about SUMA OPTIMIX 2G 90-75 on main site